Up to «Глава 9, Продвинутые темы работы над пакетом», we focused on packaging operations without using Git or any other VCS. These traditional packaging operations were based on the tarball released by the upstream as mentioned in «Раздел 9.1, «Historical perspective»».

Currently, the git(1) command is the de-facto platform for the VCS tool and is the essential part of both upstream development and Debian packaging activities. (See Debian wiki «Debian git packaging maintainer branch formats and workflows» for existing VCS workflows.)

	Примечание
	Since the non-native Debian source package uses «diff -u» as its backend technology for the maintainer modification, it can’t represent modification involving symlink, file permissions, nor binary data (March 2022 discussion on [email protected]). Please avoid making such maintainer modifications even though these can be recorded in the Git repository.

Since VCS workflows are complicated topic and there are many practice styles, I only touch on some key points with minimal information, here.

Salsa is the remote Git repository service with associated tools. It offers the collaboration platform for Debian packaging activities using a custom GitLab application instance. See:

There are 2 styles of branch names for the Git repository used for the packaging. See «Раздел 10.4, «Branch names»».

There are 2 main usage styles for the Git repository for the packaging. See:

There are 2 notable Debian packaging tools for the Git repository for the packaging.

gbp(1) and its subcommands:
- This is a tool designed to work with «Раздел 10.5, «Patch unapplied Git repository»».
- See «Раздел 10.7, «Note on gbp»».
dgit(1) and its subcommands:
- This is a tool designed to work with both «Раздел 10.6, «Patch applied Git repository»» and «Раздел 10.5, «Patch unapplied Git repository»».
- This contains a tool to upload Debian packages using the dgit server.
- See «Раздел 10.8, «Note on dgit»».

10.1. Salsa repository

It is highly desirable to host Debian source code package on Salsa. Over 90% of all Debian source code packages are hosted on Salsa. ^[20]

The exact VCS repository hosting an existing Debian source code package can be identified by a metadata field Vcs-* which can be viewed with the apt-cache showsrc <package-name> command.

10.2. Salsa account setup

After signing up for an account on Salsa, make sure that the following pages have the same e-mail address and GPG keys you have configured to be used with Debian, as well as your SSH key:

10.3. Salsa CI service

Salsa runs Salsa CI service as an instance of GitLab CI for «Раздел 9.4, «Непрерывная интеграция»».

For every «git push» instances, tests which mimic tests run on the official Debian package service can be run by setting Salsa CI configuration file «Раздел 6.13, «debian/salsa-ci.yml file»» as:

---
include:
  - https://salsa.debian.org/salsa-ci-team/pipeline/raw/master/recipes/debian.yml

# Customizations here

10.4. Branch names

The Git repository for the Debian packaging should have at least 2 branches:

debian-branch to hold the current development work.

old style: master (or debian, main, latest, …)
DEP-14 style: debian/sid
upstream-branch to hold the upstream releases.
- old style: upstream
- DEP-14 style: upstream/latest

In this tutorial, old style branch names are used in examples for simplicity.

	Примечание
	This upstream-branch may need to be created using the tarball released by the upstream independent of the upstream Git repository since it tends to contain automatically generated files.

The upstream Git repository content can co-exit in the local Git repository used for the Debian packaging by adding its copy. E.g.:

$ git remote add upstream-git <url-upstream-git-repo>
$ git fetch upstream-git master:upstream-master

This allows easy cherry-picking from the upstream Git repository for bug fixes.

10.5. Patch unapplied Git repository

The patch unapplied Git repository can be summarized as:

This seems to be the traditional practice as of 2024.

The source tree matches extracted contents by «dpkg-source -x --skip-patches» of the Debian source package.

The upstream source is recorded in the Git repository without changes.
The maintainer modified contents are confined within the debian/* directory.
Maintainer changes to the upstream source are recorded in debian/patches/* files for the Debian source format «3.0 (quilt)».

This repository style is useful for all variants of traditional workflows and gdb based workflow:

«Раздел 5.7, «Шаг 3: изменение шаблонных файлов»» (no patch)

«Раздел 5.10, «Patch by «diff -u» approach»»

debian/patches/* files can also be generated using «git format-patch», «git diff», or «gitk» from git commits in the through-away maintainer modification branch or from the upstream unreleased commits.

«Раздел 5.11, «Patch by dquilt approach»» including the last «dquilt pop -a» step
«Раздел 10.9, «Patch by «gbp-pq» approach»»
Use helper scripts such as dquilt(1) and gbp-pq(1) to manage data in debian/patches/* files.
- Add .pc line to the ~/.gitignore file if dquilt is used.
- Add unapply-patches and abort-on-upstream-changes lines in the debian/source/local-options file.
Use «dpkg-source -b» to build the Debian source package.
Use dput(1) to upload the Debian source package.
- Use «dgit --gbp push-source» or «dgit --gbp push» instead to upload the Debian package via the dgit server (see «dgit-maint-gbp(7)»).

	Примечание
	The debian/source/local-options and debian/source/local-patch-header files are meant to be recorded by the git command. These aren’t included in the Debian source package.

10.6. Patch applied Git repository

The patch applied Git repository can be summarized as:

The source tree matches extracted contents by «dpkg-source -x» of the Debian source package.
- The source tree is buildable and the same as what NMU maintainers see.
- The source is recorded in the Git repository with maintainer changes including the debian/ directory.
- Maintainer changes to the upstream source are also recorded in debian/patches/* files for the Debian source format «3.0 (quilt)».

Use one of workflow styles:

dgit-maint-merge(7) workflow.

Use this if you don’t intend to record topic patches in the Debain source package.
Good enough for packages only with trivial modifications to the upstream.
Only choice for packages with intertwined modification histories to the upstream
Add auto-commit and single-debian-patch lines in the debian/source/local-options file
Use «git checkout upstream; git pull» to pull the new upstream commit and use «git checkout master ; git merge <new-version-tag>» to merge it to the master branch.
Use «dpkg-source -b» to build the Debian source package.
Use «dgit push-source» or «dgit push» for uploading the Debian package via the dgit server.
See «Раздел 5.12, «Patch by «dpkg-source --auto-commit» approach»» for example.
dgit-maint-debrebase(7) workflow.
- Use this if you wish to commit maintainer changes to the patch applied Git repository with the same granularity as patches of «Раздел 10.9, «Patch by «gbp-pq» approach»».
- Good for packages with multiple sequenced modifications to the upstream.
- Use «dgit build-source» to build the Debian source package.
- Use «dgit push-source» or «dgit push» for uploading the Debian package via the dgit server.
- Details of this workflow are beyond the scope of this tutorial document. See «Раздел 10.12, «Note on dgit-maint-debrebase workflow»» for more.

10.7. Note on gbp

The gbp command is provided by the git-buildpackage package.

This command is designed to manage contents of «Раздел 10.5, «Patch unapplied Git repository»» efficiently.
Use «gbp import-orig» to import the new upstream tar to the git repository.
- The «--pristine-tar» option for the «git import-orig» command enables storing the upstream tarball in the same git repository.
- The «--uscan» option as the last argument of the «gbp import-orig» command enables downloading and committing the new upstream tarball into the git repository.
Use «gbp import-dsc» to import the previous Debian source package to the git repository.
Use «gbp dch» to generate the Debian changelog from the git commit messages.
Use «gbp buildpackage» to build the Debian binary package from the git repository.
- The sbuild package can be used as its clean chroot build backend either by configuration or adding «--git-builder='sbuild -A -s --source-only-changes -v -d unstable'»
Use «gbp pull» to update the debian, upstream and pristine-tar branches safely from the remote repository.
Use «gbp pq» to manage quilt patches without using dquilt command.
Use «gbp clone REPOSITORY_URL» to clone and set up tracking branches for debian, upstream and pristine-tar.

Package history management with the git-buildpackage package is becoming the standard practice for many Debian maintainers. See more at:

«Сборка пакетов Debian с помощью git-buildpackage»
«4 tips to maintain a “3.0 (quilt)” Debian source package in a VCS»
The systemd packaging practice documentation on «Building from source»
The workflow mentioned in dgit-maint-gbp(7) which enables to use this gbp with dgit

10.8. Note on dgit

The dgit command is provided by the dgit package.

This command is designed to manage contents of «Раздел 10.6, «Patch applied Git repository»» efficiently.
- This enables to access the Debian package repository as if it is a git remote repository.
This command supports uploading Debian packages using the dgit server from both «Раздел 10.5, «Patch unapplied Git repository»» and «Раздел 10.6, «Patch applied Git repository»».

The new dgit package offers commands to automate packaging activities using the git repository as an alternative to still popular gbp-buildpackage. Please read their guide:

dgit-maint-merge(7) — for the Debian source format «3.0 (quilt)» package with its changes flowing both ways between the upstream Git repository and the Debian Git repository which are tightly coupled using «Раздел 10.6, «Patch applied Git repository»».
dgit-maint-debrebase(7) — for the Debian source format «3.0 (quilt)» package with its changes flowing mostly one way from the upstream Git repository to the Debian Git repository using «Раздел 10.6, «Patch applied Git repository»».
dgit-maint-gbp(7) — for the Debian source format «3.0 (quilt)» package with its Debian Git repository which is kept usable also for people using gbp-buildpackage(1) using «Раздел 10.5, «Patch unapplied Git repository»».
dgit-maint-native(7) — for the Debian source format «3.0 (native)» package in the Debian Git repository. (No maintainer changes)

The dgit(1) command can push the easy-to-trace change history to the https://browse.dgit.debian.org/ site and can upload Debian package to the Debian repository properly without using dput(1).

The concept around dgit is beyond this tutorial document. Please start reading relevant information:

10.9. Patch by «gbp-pq» approach

For «Раздел 10.5, «Patch unapplied Git repository»», you can generate debian/patches/* files using the gbp-pq(1) command from git commits in the through-away patch-queue branch.

Unlike dquilt which offers similar functionality as seen «Раздел 5.11, «Patch by dquilt approach»» and «Раздел 8.5, «Manage patch queue with dquilt»», gbp-pq doesn’t generate .pc/* files.

10.10. Manage patch queue with gbp-pq

You can add, drop, and refresh debian/patches/* files with gbp-pq to manage patch queue.

If the package is managed in «Раздел 10.5, «Patch unapplied Git repository»» using the git-buildpackage package, you can revise the upstream source to fix bug as the maintainer and release a new Debian revision using gbp pq.

Add a new patch recording the upstream source modification on the file buggy_file as:

 $ git checkout master
 $ gbp pq import
gbp:info: ... imported on 'patch-queue/master
 $ vim buggy_file
  ...
 $ git add buggy_file
 $ git commit
 $ gbp pq export
gbp:info: On 'patch-queue/master', switching to 'master'
gbp:info: Generating patches from git (master..patch-queue/master)
 $ git add debian/patches/*
 $ dch -i
 $ git commit -a -m "Closes: #<bug_number>"
 $ git tag debian/<version>-<rev>

Drop (== disable) an existing patch
- Comment out pertinent line in debian/patches/series
- Erase the patch itself (optional)

Refresh debian/patches/* files to make «dpkg-source -b» work as expected after updating a Debian package to the new upstream release.

 $ git checkout master
 $ gbp pq --force import # ensure patch-queue/master branch
gbp:info: ... imported on 'patch-queue/master
 $ git checkout master
 $ gbp import-orig --pristine-tar --uscan
  ...
gbp:info: Successfully imported version ?.?.? of ../packagename_?.?.?.orig.tar.gz
 $ gbp pq rebase
 ... resolve conflicts and commit to patch-queue/master branch
 $ gbp pq export
gbp:info: On 'patch-queue/master', switching to 'master'
gbp:info: Generating patches from git (master..patch-queue/master)
 $ git add debian/patches
 $ git commit -m "Update patches"
 $ dch -v <newversion>-1
 $ git commit -a -m "release <newversion>-1"
 $ git tag debian/<newversion>-1

10.11. gbp import-dscs --debsnap

For Debian source packages named «<source-package>» recorded in the snapshot.debian.org archive, an initial git repository managed in «Раздел 10.5, «Patch unapplied Git repository»» with all of the Debian version history can be generated as follows.

$ gbp import-dscs --debsnap --pristine-tar <source-package>

10.12. Note on dgit-maint-debrebase workflow

Here are some hints around dgit-maint-debrebase(7). ^[21]

Use «dgit setup-new-tree» to prepare the local git working repository.
The first maintainer modification commit should contain files only in the debian/ directory excluding files in the debian/patches directory.
debian/patches/* files are generated from the maintainer modification commit history using the «dgit quilt-fixup» command automatically invoked from «dgit build» and «dgit push».
Use «git-debrebase new-version <new-version-tag>» to rebase the maintainer modification commit history with automatically updated debian/changelog.
Use «git-debrebase conclude» to make a new pseudomerge (== «git merge -s ours») to record Debian package with clean ff-history.

See dgit-maint-debrebase(7), dgit(1) and git-debrebase(1) for more.

10.13. Quasi-native Debian packaging

The quasi-native packaging scheme packages a source without the real upstream tarball using the non-native package format.

	Подсказка
	Some people promote this quasi-native packaging scheme even for programs written only for Debian since it helps to ease communication with the downstream distros such as Ubuntu for bug fixes etc.

This quasi-native packaging scheme involves 2 preparation steps:

Organize its source tree almost like native Debian package (see «Раздел 6.4, «Родной пакет Debian»») with debian/* files with a few exceptions:
- Make debian/source/format to contain «3.0 (quilt)» instead of «3.0 (native)» .
- Make debian/changelog to contain version-revision instead of version .
Generate missing upstream tarball preferably without debian/* files.
- For Debian source format «3.0 (quilt)», removal of files under debian/ directory is an optional action.

The rest is the same as the non-native packaging workflow as written in «Раздел 6.1, «Работа по созданию пакета»».

Although this can be done in many ways («Раздел 15.4, «Snapshot upstream tarball (-d, -t)»»), you can use the Git repository and «git deborig» as:

 $ cd /path/to/<dirname>
 $ dch -r
  ... set its <version>-<revision>, e.g., 1.0-1
 $ git tag -s debian/1.0-1
 $ git rm -rf debian
 $ git tag -s upstream/1.0
 $ git commit -m upstream/1.0
 $ git reset --hard HEAD^
 $ git deborig
 $ sbuild

^[20]Use of git.debian.org or alioth.debian.org are deprecated now.

^[21]I may be incorrect, here.


Глава 9. Продвинутые темы работы над пакетом		Глава 11. Полезные советы