Revision 7.1, Debian Policy 4.7.0.1, 2024-08-25
Copyright © 1998, 1999, 2000 Wichert Akkerman, Joey Hess
These are the copyright dates of the original configuration management protocol document. Since then, this document has been updated by many others. No comprehensive collection of copyright notices for subsequent work exists.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of the Debian Project nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS MANUAL IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Table of Contents
Configuration management is quickly becoming a very important issue. Having programs which do cool stuff is great, but we need to store their configuration as well. We see more and more different configuration systems being introduced all the time, which is not very practical. This text introduces a general configuration management system which flexible enough to be used for all kinds of applications.
All configuration information is stored in what I call the
configuration space. This is a database with a special design
which resembles the method we look at configuration information.
This is done by defining a hierarchy of information. Each package
receives its own space in the hierarchy. Each package is free to
use a flat space, or divide its space further into
sub-hierarchies. If multiple packages share a common purpose they
may use a shared toplevel hierarchy, preferably with the same name
as a shared (virtual) package name (for example, both
mutt and elm
can use mail-reader,
strn and nn
could use news-reader). This
shared tree can also be used as a default, ie a variable
news-reader/nntpserver can be used by
strn if strn/nntpserver
does not exist.
Each variable in the configuration space has some information associated with it. Most importantly, it has a value. It also may have a set of flags and a set of substitution data.
Each variable in the configuration space is associated with some meta-data. The minimum meta-data associated with a variable is: long and short description, type, and default value. The meta-data is essentially static; the protocol described below does not allow it to be changed.
The meta-data exists in a space with similar naming properties to the configuration space described above, and typically one variable in the configuration space will have associated with it metadata with the same name in the meta-data space. However, this need not be the case; many different variables can all be associated with the same meta-data. In effect the meta-data serves as a template for the configuration variable.
So, what do we need to store in a variable template? Of course we need a name to identify the template. Template names are made up of components separated by the character '/' (slash). Each component is limited to alphanumerics and '+' '-' '.' '_' (plus, minus, full stop, underscore).
A type is also needed so data can be verified. Here is a table of common types; implementations are free to make up more.
Table 1. Available data types
| Type | Description |
|---|---|
| string | Holds any arbitrary string of data. |
| boolean |
Holds "true" or "false".
|
| select |
Holds one of a finite number of possible values. These
values must be specified in a field named
Choices:. Separate the possible values
with commas and spaces, like this:
Choices: yes, no, maybe
|
| multiselect |
Just like the select data type, except the user can choose any
number of items from the list. This means that the
Default: field and the actual value of the
question may be a comma and space delimited list of values,
just like the Choices: field.
|
| note | This template is a note that can be displayed to the user. As opposed to text, it is something important, that the user really should see. If it is not possible to display it, it might be saved to a log file or mailbox for them to see later. |
| text | This template is a scrap of text that can be displayed to the user. It's intended to be used for mostly cosmetic reasons, touching up around other questions that are asked at the same time. Unlike a note, it isn't treated as something the user should definitely see. Less complex frontends may refuse to ever display this type of element. |
| password | Holds a password. Use with caution. Be aware that the password the user enters will be written to a database. You should consider clearing that value out of the database as soon as is possible. |
| title | Holds a (short) string that can be displayed using the SETTITLE command. Only the value of the short description will be used. |
Of course a default value is useful as well, and finally we need a description of the variable. We actually use two descriptions: a short one (limited to 50 characters or so) and an extended one.
The extended description may be word-wrapped by the
FrontEnd. To make separate paragraphs in it, use .
on a line by itself to separate them. Text in the extended
description that is prefaced by additional whitespace will not be
wordwrapped. Both the description and extended
description may have substitutions embedded in them. Ie,
${foo}. These will be expanded when the
descriptions are displayed.
This information is stored in a template file that consists of stanzas in a rfc-822 compliant format, separated by blank lines. Here is an example:
Template: hostname Type: string Default: debian Description: unqualified hostname for this computer This is the name by which this computer will be known on the network. It has to be a unique name in your domain. Template: domain Type: string Description: domain for this computer This is the domain your computer is a member of. Typically it is something like "mycompany.com" or "myuniversity.edu".
For localization, the description field (and also the choices field of a select or multiselect type question, and the default field of a string or password type question) can be supplemented with versions for other languages. These are named Description-ll, Description-ll_LL, Description-ll_LL.encoding and so on.
Of course applications can use the database and meta-database directly. But there should be a simple system to interact with the user that is simple and modular enough to be used with systems ranging from shell-scripts to Fortran programs. To do this we define a general frontend that can be driven using the simplest and most common form of communication: stdin and stdout.
Using this simple form of communication gives us a great advantage: it becomes easy to change the frontend. That means the user can switch between a console, a graphical or even a web-interface at will.
Besides being able to switch between types of frontends there is another important aspect of a good user interface: user friendliness. We have to account for the fact that some users know more then others and change the information we show or ask from the user. We do this by giving everything a priority and giving the user control over what kind of questions he wants to see. Experts can request to see everything, while novices get the option of only seeing only important questions. Finally there is an option to simply skip all questions, so it becomes possible to do automatic configuration using default values or values that are downloaded into the database from a remote location. This makes it simple for example to install and manage clusters or lab rooms or do installs for dummies.
This communication between the frontend and the application should be as simple as possible. Since most IO implementations default to line-buffered IO, so we use a simple language where each command is exactly one line.
After sending each command to stdout, the client should read one line from stdin. This is the response to the command, and it will be in the form of a number followed by whitespace and an optional string of text. The number is the status code, while the text provides additional information.
Table 2. Numeric status codes
| Range | Description |
|---|---|
| 0 | success |
| 1-9 | reserved |
| 10-19 | invalid parameters |
| 20-29 | syntax errors |
| 30-99 | command-specific return codes |
| 100-109 | internal errors |
| 110-255 | reserved |
Here are the currently supported commands.
This exchanges with the frontend the protocol version number that is
being used. The current version is 2.1. Versions in the 2.x series
will be backwards-compatible. You may specify the protocol version
number you are speaking. The frontend will return the version of the
protocol it speaks. If the version you specify is too low, this
command will return the numeric return code 30.
This exchanges with the frontend a list of supported capabilities Capabilities both the frontend and your confmodule support may be used; the capabilities supported by the frontend are returned by this command.
Table 3. Currently used capabilities
| capability | description |
|---|---|
| backup | Backing up to a previous step is supported. |
| escape |
The frontend expects commands sent to it to have
backslashes and newlines quoted as \\
and \n respectively and will in turn
quote backslashes and newlines in its replies. See
debconf-escape(1).
|
| multiselect | The multiselect data type is supported. You do not need to check this capability if you depend on any modern version of debconf. |
You can use this command to set a title in the frontend. This may appear in different ways, depending on the frontend being used, for example it might change the title of the frontend's window. If you don't specify anything, a title will automatically be generated.
Using a template has the advantage that titles are translatable and that they can be maintained in the same place as other text displayed to users.
Similar to SETTITLE, but takes a string instead of a template as parameter. Consequence is that the title will not be translatable, unless some other mechanism (like gettext) is used.
This command tells the frontend you're done talking to it. Typically the frontend can detect the termination of your program and this command is not necessary.
This tells the frontend to display a question (or other type of
item) to the user. question is the name of
the item to display, all other information about the item is
retrieved from the templates described previously.
priority is how important it is that the user
be prompted. The frontend need only ask this question if the
priority is high enough. The question is not displayed until a go
command is given. This allows us to ask multiple questions in a
single screen. Once a question has been displayed to the user and
the user has provided input, the frontend will set the
seen flag.
Table 4. Supported priorities
| Priority | Description |
|---|---|
| low | Very trivial items that have defaults that will work in the vast majority of cases. |
| medium | Normal items that have reasonable defaults. |
| high | Items that don't have a reasonable default. |
| critical | Items that will probably break the system without user intervention. |
Note that the frontend decides if the user is actually prompted or
not. If the user has already answered a question, they are normally
not asked it again even if input is called again. And if the user is
ignoring low priority items, they will not see them. In either of
these cases, this command returns the numeric return code
30.
Some frontends are able to display a number of items to the user at once. To do this, they need to be given blocks of input commands, enclosed in the BEGINBLOCK and ENDBLOCK commands. Blocks can be nested and very advanced frontends may use this as a user interface hint.
There is an implicit block around any set of INPUT commands that are not enclosed in an explicit block.
Shows the current set of accumulated items to the user and lets them
fill in values, etc. If the backup capability is supported and the
user indicates they want to back up a step, this command returns the
numeric return code 30.
Clears the accumulated set of INPUT commands without displaying them to the user.
Ask the frontend to tell you how the user answered a question. The value is returned to you.
Set the answer of a question to a value.
Reset the question to its default value. This includes resetting flags to their defaults.
Questions (and other items) can have substitutions embedded in their
descriptions (and, currently in their choices fields). These
substitutions look like "${key}". When the
question is displayed, the substitutions are replaced with their
values. This command can be used to set the value of a substitution.
Questions (and other items) can have flags associated with them. The
flags have a value of "true" or
"false". This command returns the value of a
flag.
This sets the state of a flag on a question. Valid states for the
flag are "true" and "false".
One common flag is the "seen" flag. It is
normally only set if a user already seen a question. Typically,
frontends only display questions to users if they have the seen flag
set to "false". Sometimes you want the user to see a question again
-- in these cases you can set the seen flag to false to force the
frontend to redisplay it.
Note that as a special convenience behavior, frontends will redisplay already seen questions if the question was first seen by the user in the same confmodule run. This makes it easy for a confmodule to back up to previous questions without having to reset the seen flag.
This returns the value of any field of a question (the description, for example).
This creates a new question that is bound to a template. By default each template has an associated question with the same name. However, any number of questions can really be associated with a template, and this lets you create more such questions.
This removes a question from the database.
Call this in your postrm when your package is purged. It removes all templates and questions your package has generated.
Debian has had an excellent packaging system for a long time now. There is one thing missing though: a system to handle the configuration of packages so we don't have to stop the installation every time a package needs some data from the user or wants to show some information.
We want to make a package which does not break older dpkg's, and we want to be able to get the configuration information before the package is unpacked. To do this we add two new files, config and templates, to the control.tar.gz of a .deb package. Since all installation-software (apt, dselect, dpkg) download the package before installing it, we can extract this before the package is unpacked.
The templates file lists the templates for variables that this package uses. This is done using the format as used in the example in the section on templates.
The config-file contains a new element, which I call the configmodule. This is a program that will determine the configuration before the package is unpacked. This means it is usually run before the preinst, and before the package is unpacked!
Please see debconf-devel(7) for details.
This is done to make sure that we can use the desired configuration in the preinst if necessary.
How does the configmodule get its information? The configmodule needs a way to retrieve information from the configuration space, ask the user for information if necessary, etc. But we don't want to implement a user interface for each package. To solve this we use a separate frontend as specified in the section on frontends.